In the process of using the rail type lifting platform, the failure of the platform cannot be avoided. The common problems are that the platform cannot rise, falls and leaks oil. Now, editors with many years of experience in the rail type lifting platform industry will make some analysis on this:

一、無法上升問題

1、 Failure to rise

有可能的原因：

Possible causes:

1、平臺上的電機反方向轉動了；

1. The motor on the platform rotates in the opposite direction;

2、卸荷閥沒有關閉；

2. The unloading valve is not closed;

3、液壓油里面有鐵屑、碎片等雜物導致手動油泵單向閥沒有完全關閉

3. The check valve of the manual oil pump is not completely closed due to iron chips, debris and other sundries in the hydraulic oil

該怎么解決：

How to solve:

1、將電源箱調換一下相線；

1. Change the phase line of the power box;

2、檢查并完全關閉卸荷閥；

2. Check and completely close the unloading valve;

3、過濾下或者更換液壓油，完全清洗液壓系統內部

3. Filter or replace the hydraulic oil, and completely clean the interior of the hydraulic system

二、有可能的原因：

2、 Possible causes:

1、手泵卸荷閥沒有完全關閉；

1. The unloading valve of the hand pump is not completely closed;

2、支撐閥內部有雜物；

2. There are sundries inside the support valve;

3、支撐閥的閥體閥芯授勛嚴重

3. The valve body and spool of the support valve are severely decorated

該怎么解決：

How to solve:

1、重新關閉下卸荷閥，

1. Close the lower unloading valve again,

2、清洗下支撐閥；

2. Clean the lower support valve;

3、更換一個新的支撐閥

3. Replace the support valve with a new one

三、平臺漏油

3、 Platform oil leakage

有可能的原因：

Possible causes:

1、O型密封圈磨損嚴重；

1. O-ring is seriously worn;

2、油缸磨損嚴重，

2. The oil cylinder is severely worn,

該怎么解決：

How to solve:

1、更換一個新的密封圈；

1. Replace with a new sealing ring;

2、更換一個新的油缸

2. Replace the oil cylinder with a new one

以上就是為大家介紹的有關升降貨梯廠家的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://szitdell.com

The above is a detailed introduction to the elevator manufacturer, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide services for you with our attitude http://szitdell.com