The scissor fixed unloading lifting platform and the guide rail unloading lifting platform are collectively referred to as "unloading lifting platform". These two kinds of equipment can be used for the vertical transportation of trucks between floors. They are also what we call economic and practical products that replace elevators.

相同點：同為高樓間貨物裝卸運輸，各樓層均可安裝控制按鈕。實現多點控制，在功能上都設有防止突然斷電緊急下降裝置、防止液壓油管破裂的保護閥，以及防超載、超重等裝置。

The same point: for the cargo loading, unloading and transportation between high-rise buildings, control buttons can be installed on each floor. It realizes multi-point control, and is equipped with safety protection valves to prevent sudden power failure and emergency descent, to prevent hydraulic oil pipe from cracking, and to prevent overload, overweight and other safety devices.

不同點：

difference:

剪叉式固定卸貨升降平臺剪叉臂采用高輕度矩形管打造而成，通過液壓原理，液壓泵打油進入油缸，將臺面提升。而且在使用范圍上不僅局限于樓層運輸，還可用于大型物件舉升、立體停車場、物流上鞋線以及工程流水線高度差之間貨物運輸?shù)葓?chǎng)所。

The scissor arm of the scissor type fixed unloading lifting platform is made of high and light rectangular tubes. Through the hydraulic principle, the hydraulic pump pumps oil into the oil cylinder to lift the table. Moreover, the scope of use is not only limited to floor transportation, but also can be used in places such as large object lifting, three-dimensional parking lot, logistics shoe line, and cargo transportation between the height differences of engineering assembly lines.

導軌式液壓卸貨升降平臺是由鏈條、鋼絲繩、油缸等組合而成，也是通過液壓原理，液壓油進入油缸，油缸帶動鏈條將臺面升起；總結一句；就是以液壓油缸為動力，板式起重鏈條傳動。

The guide rail hydraulic unloading lifting platform is composed of chain, steel wire rope, oil cylinder, etc. through the hydraulic principle, the hydraulic oil enters the oil cylinder, and the oil cylinder drives the chain to raise the table; Sum up a sentence; It is driven by hydraulic cylinder and driven by plate lifting chain.

安裝不同，導軌式卸貨升降平臺可以挖坑固定也可做斜坡固定，而剪叉式固定卸貨升降平臺需要挖坑固定，挖坑深度不是很深，在上相比，同高度、載重、平臺的情況下、剪叉式固定卸貨升降平臺的要比剪叉式液壓卸貨升降平臺要貴。但在安裝上導軌式卸貨升降平臺要剪叉式固定卸貨升降平臺要麻煩很多。

The installation is different. The guide rail unloading lifting platform can be fixed by digging a pit or by slope, while the scissor fixed unloading lifting platform needs to be fixed by digging a pit, and the depth of the pit is not very deep. In terms of price, the price of the scissor fixed unloading lifting platform is higher than that of the scissor hydraulic unloading lifting platform under the same height, load and platform. However, it is a lot of trouble to install the rail type unloading lifting platform and the scissor type fixed unloading lifting platform.

以上就是為大家介紹的有關剪叉式液壓升降平臺的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://szitdell.com

The above is a detailed introduction about the scissor hydraulic lifting platform. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://szitdell.com